| 型号 Model |
ZK-AD1036 | ||
| 输 入 Input |
输入电压 Voltage Range |
85-265Vac | |
| 工作频率 Frequency Range |
47～63Hz | ||
| 输出 Output |
输出功率 Rated Power |
8W | |
| 输出电压 DC Voltage |
8-10.5Vdc(3串3并LED） | ||
| 输出电流 Rated Current |
0.75A | ||
| 功能描述 Functional de |
1.配置的电池为3节串联锂电池 2.设有主电、充电指示灯 3.消防应急灯在主电电压为187～264Vac范围内,不转入应急状态 4.应急状态下,如拔掉电池接线,应急灯灭,再接上电池,应急灯也不亮,需接入AC电激活 5.电池的最大连续充电电流不超过0.1A 6.电池充电终止电压为12.4V，放电终止电压为10.0V，静态电流小于40uA 7.PCBA上设有转接口，可以实现有主电时亮或有主电时不亮 (以上功能全部由MCU控制，可根据客户需要调整） |
1. Configurations of the battery for the 3 series of lithium battery 2. Is provided with a main electric, a charge indicator lamp 3. Fire emergency lights on the main voltage to the range of 187 ~ 264Vac, not to the state of emergency 4.The state of emergency, such as pull the battery terminal, emergency lights, and the battery, the emergency lamp is not bright, need to access AC electrical activation 5. Cell maximum continuous charging current is not more than 0.1A 6. Battery charge termination voltage 12.4V, discharge termination voltage is 10.0V, the static current is less than 40uA 7. PCBA is provided with an interface, can be achieved with a main electric light or a main power not bright (all the above features is controlled by MCU, customers may need to adjust) |
|
| 保护 Protection |
短路 Short Circuit |
打嗝模式 Hiccup mode |
|
| 环境 Environment |
工作温度 Working Temp |
-20℃～+55℃ | |
| 存储温度 Storage Temp |
-20℃～+85℃ | ||
